Technical Information

Download 613.22 Kb

Fitting instructions for replacing brakes

Download 928.62 Kb

Technical Information

  Download 3.36 Mb

Previously the mouse trap locked the pad to the piston and held it in place to prevent vibration and noise...

Download 226.66 Kb

When servicing the wheel brake, the mechanical parts are to be greased with a temperature resistant endurance lubricant in order to maintain optimum operation...

Download 80.69 Kb

Today, more than 80 per cent of the new CVs and busses are equipped with disk brakes and the share of new trailers has already mounted to 60 per cent. Right from the start, TMD Friction Group located in Leverkusen has been among the significant original equipment suppliers of disk brake pads. In spite of the general acceptance, we still find a prevailing demand for information in repair shops...

Download 45.70 Kb

The self-adjustment device of rear axle drum brakes can be subject to malfunction. The most frequent cause is the adjustment´s slipping or a defective gearing of the toothing. Consequently, there will be no braking effect neither of the operating nor of the parking brake concerned...

Download 98.95 Kb

When replacing the disk brake pads of a Porsche 911 (type 964, 933 and 996), the new pads are often hard to mount on front and rear axle...

Download 57.75 Kb

TEVES - combined callipers are becoming more frequently specified for rear axles by many automotive producers (e. g. Opel, BMW, Mini, Ford, Mazda, etc.). Assembly and maintenance of the calliper requires special attention...

Download 69.55 Kb

The same care should be taken when using wheel or wheel rim cleaners as when using any other cleaning agent. Contact between the cleaner and the brake system should be avoided, and can be minimised by ensuring the agent is applied carefully and in only recommended volumes...

Download 66.96 Kb

DO NOT operate handbrake lever before fitting to the vehicle. The unit has been preset at the factory, if you have to, go to the last paragraph. Adjust the pad gap on the brake caliper using the adjusting procedures below to ensure there is no more than 1mm clearance between both brake pads and disc...

Download 36.94 Kb